FAQs
Frequently asked questions.
Got questions about our strip out and demolition services? We've compiled answers to the most common queries from our clients.
General
We service the entire Gold Coast, Brisbane, Logan, and Northern NSW including Southport, Surfers Paradise, Broadbeach, Burleigh Heads, Robina, Helensvale, Coomera, and surrounding suburbs, plus the Tweed Heads area.
A strip-out is a form of internal demolition that involves removing non-structural elements such as walls, finishes, fixtures, and joinery. This leaves a clean, trade-ready shell for renovation or refurbishment.
A typical strip-out includes wall and partition removal, cabinet removal, tile removal, floor covering removal, ceiling and wall lining removal, debris disposal, and a thorough final cleanup.
Yes, we handle everything from bathroom and kitchen strip outs in homes through to full commercial office, shop, restaurant, and warehouse defits.
Yes. Strip It Out provides bathroom strip outs right across the Gold Coast and Brisbane, including Logan, the northern Gold Coast corridor and the Tweed. Tell us your suburb when you call and we will confirm availability and book a free, no-obligation quote.
Yes. Strip It Out provides concrete grinding and floor preparation right across the Gold Coast and Brisbane corridor for homes, retail tenancies and warehouses. Tell us your location and floor area for a free quote.
Yes. Strip It Out provides residential strip outs and internal demolition across the Gold Coast, Brisbane, Logan and the Tweed. Tell us your suburb and the rooms involved, and we will arrange a free, no-obligation quote.
Yes. Strip It Out provides tile removal right across the Gold Coast and Brisbane, from single bathrooms to full commercial floors. Send a photo of your tiled area and we will return a free, fixed-scope quote.
Yes. Any building work in Queensland valued over $3,300 requires a QBCC-licensed contractor. Internal strip-out work is classified as building work under the QBCC Act, so a current QBCC contractor licence of the appropriate class is required for any commercial-priced job. Verify your contractor's licence at the QBCC's "Find a Local Contractor" tool before signing.
Usually no for pure non-structural interior strip outs in commercial tenancies. You generally do need a permit or development approval when a structural wall is being touched, the building is heritage-listed, the project precedes a full demolition, or essential safety services (sprinklers, alarms) are being altered. Confirm with Brisbane City Council or Gold Coast City Council, or an accredited building certifier, before scope is finalised.
Services & Specialisations
Absolutely. We handle racking and shelving removal, internal office demolition, floor covering and coating removal, and concrete grinding and floor preparation for industrial spaces.
Yes, we're experienced in body corporate environments. We plan carefully around lifts, loading zones, noise restrictions, and common area protection.
We remove tiles, tile bedding, timber, bamboo, cork, vinyl, and carpet. We also offer concrete grinding and subfloor preparation for new flooring installation.
Concrete grinding uses diamond grinding equipment to remove glue, paint, coatings, and high spots from concrete surfaces, creating a perfectly level substrate for new flooring.
Timelines vary based on the size and complexity of the space. A small retail shop might take 1-2 days, while a large office floor could take a week. We provide a clear timeline with every quote.
Yes, we can schedule work outside business hours or on weekends to minimise disruption to your business or neighbouring tenants.
If asbestos is suspected or found, we stop work immediately and recommend a licensed asbestos assessor. We coordinate with licensed removalists before resuming.
Our warehouse strip outs cover racking and shelving removal, internal office demolition, floor covering and coating removal, concrete grinding, and full waste disposal.
Yes, we handle mezzanine strip outs including the flooring, handrails, and internal fit-out. Structural steel removal may require a separate structural demolition contractor.
We arrange appropriate skip bins and waste disposal for industrial volumes. All waste is disposed of responsibly in accordance with Queensland regulations.
A make-good or defit is the process of returning a commercial tenancy to its original condition or the condition specified in your lease agreement at the end of your lease.
Yes, we regularly work with property managers and landlords to ensure the make-good meets lease requirements. We can attend site inspections and coordinate directly.
We recommend booking at least 2-3 weeks before your required completion date. For larger spaces, contact us as early as possible to secure your preferred dates.
We adhere strictly to body corporate noise restrictions, typically working within approved hours. We communicate with the building manager to coordinate lift access and loading zones.
Absolutely. We lay protective coverings on all shared surfaces including hallways, lifts, and lobby areas. We ensure the building is left clean at the end of each day.
Yes, we plan carefully to minimise disruption to other residents, including managing dust containment and noise levels.
A residential strip out can include kitchen removal, bathroom demolition, flooring removal, wall and ceiling removal, and full debris disposal. We tailor the scope to your renovation plans.
Yes, we handle complete home gut-outs where everything internal is removed back to the structural frame, ready for a full renovation.
Every job includes a thorough cleanup. We remove all demolition waste, sweep, and vacuum the area so it is trade-ready for the next stage of your renovation.
Most kitchen demolitions are completed in a single day, depending on size and scope. We provide a clear timeline with your quote.
Yes, we remove all flooring within the kitchen area including tiles, vinyl, and timber, leaving a clean substrate for your new floor.
Licensed plumbers and gas fitters handle disconnections. We coordinate with these trades to ensure everything is safely disconnected before demolition begins.
Concrete grinding removes glue, paint, epoxy coatings, and high spots from concrete surfaces, creating a perfectly level substrate for new flooring installation.
We use diamond grinders with integrated dust extraction to minimise airborne dust. Our equipment captures dust at the source for a cleaner, safer process.
Yes, we grind both indoor and outdoor concrete surfaces including patios, driveways, and balconies across the Gold Coast and Brisbane.
Most bathroom strip outs take 1-2 days depending on size. A small ensuite might be done in a day, while a larger bathroom with separate bath and shower could take two days.
Yes, we remove the existing waterproofing membrane so your waterproofer can apply a fresh membrane to the clean substrate.
Our team is experienced in working around plumbing. We take care to avoid damage to pipes and coordinate with licensed plumbers when disconnection is required.
Timber flooring adhesive is industrial-strength and extremely difficult to remove without professional ride-on scrapers and diamond grinders. DIY attempts usually damage the subfloor.
Yes, we remove bamboo flooring using the same professional equipment as timber. Bamboo adhesives can be particularly tenacious, making professional removal even more important.
Yes, we grind the subfloor after removing timber or bamboo to remove all adhesive residue, leaving a smooth surface ready for your new flooring.
A typical residential vinyl removal takes less than a day. The timeline depends on the area size, number of adhesive layers, and whether concrete grinding is needed.
Yes, older homes often have several layers of vinyl. We remove all layers including each adhesive layer, right down to the concrete slab.
Yes, our carpet removal includes the underlay, gripper strips, and any adhesive, leaving a clean subfloor.
It can be, but we use low-dust methods including dust extraction equipment and HEPA-filtered vacuums to keep dust to an absolute minimum during tile removal.
Yes, we remove both the tiles and the cement bedding or adhesive underneath. This is essential for a proper substrate finish.
Yes, we remove tiles from both floors and walls, including bathroom and kitchen splashback tiles.
We remove epoxy, paint, polyurethane, sealers, and other coatings from concrete surfaces using diamond grinding methods.
Our diamond grinding process includes integrated dust extraction, so epoxy and paint removal is a relatively clean process compared to chemical stripping methods.
Yes, we commonly remove paint and coatings from garage floors, warehouse floors, and commercial concrete surfaces across the Gold Coast and Brisbane.
Yes. We carry all demolition debris out through agreed access routes, protect lifts and common areas, and remove every load from site for responsible disposal, so shared areas are left clean. Bulky strata rubbish removal can also be booked on its own.
Yes. Concrete grinding is the standard next step after tile or coating removal. We grind off leftover adhesive, tile bedding and ridges to leave a flat, sound substrate ready for new flooring, polishing or a fresh coating.
Yes. We remove splashback and wall tiles back to the substrate as part of a kitchen strip out, along with cabinets, benchtops and flooring. The space is left clean and trade-ready for your cabinetmaker or builder.
Yes. We strip epoxy, polyurethane and floor paint from warehouse, factory, retail and garage slabs using diamond grinding, then leave the concrete profiled and ready for a new coating or floor. Large floors are quoted by area.
Yes. A shop defit includes removing signage, branding, shopfront joinery, counters, partitions, flooring and lighting, returning the tenancy to a bare shell or the condition your lease specifies.
Yes. We clean up adhesive and residue, and where glue or bitumen is heavily bonded we grind the substrate back to a smooth, sound surface ready for your new flooring.
Yes. We remove carpet and vinyl from offices, retail spaces and large commercial floors, including commercial broadloom and bitumen-backed sheet, and can work after hours to suit a trading business.
Yes. Racking, shelving and mezzanine removal are core parts of a warehouse strip out. We dismantle and remove storage systems, internal offices and fixtures, and haul all material off site for responsible disposal.
Yes. Direct-stick timber and bamboo floors are the toughest to remove. We use ride-on and walk-behind scrapers to lift the boards, then grind off the adhesive residue so the subfloor is flat and ready for new flooring.
We clear demolition waste, construction debris and bulky rubbish from your site: broken tiles, timber and plasterboard offcuts, ripped-up flooring, old cabinetry, fixtures and general renovation rubble. Material is loaded, hauled away and disposed of responsibly.
Safety & Process
Yes, we hold proper licenses and carry comprehensive public liability and workers' compensation insurance. We follow strict Australian and Queensland safety standards on every project.
If asbestos is suspected, we immediately stop work and recommend a licensed asbestos assessor. If confirmed, a licensed removalist handles the removal before we continue.
We use dust extraction equipment, wet methods, HEPA vacuums, task-specific controls, and respiratory protection for our workers to manage silica dust safely.
Licensed electricians and plumbers are required for disconnection to ensure safety and compliance. Our team coordinates with these trades for you.
Yes. We coordinate licensed electricians and plumbers to safely disconnect power, gas and water before demolition begins, so the strip out is carried out safely and to code.
We offer low-dust tile removal. Our equipment runs with HEPA dust extraction and we seal off work areas, which captures the vast majority of airborne dust, so the work can go ahead even in occupied homes.
Lifting boards creates little dust; grinding the adhesive residue afterwards creates more. We run dust extraction during grinding to keep airborne dust low, so the work stays clean even in an occupied home.
For low-value residential work in your own owner-occupied home, you can do limited DIY — though over $3,300 in scope requires a licensed contractor in Queensland. Any commercial work, any work involving asbestos (in pre-1990 buildings), and any silica-generating work all require licensed and trained professionals. DIY strip out is also where most workplace dust injuries happen — silica and asbestos exposure is cumulative and irreversible.
Yes. Power, gas, water and fire services must be formally isolated by the relevant licensed trades — licensed electrician, plumber and gas fitter — before the strip-out crew arrives. This is non-negotiable for safety and is regulated. A reputable contractor coordinates this as part of the pre-start sequence and schedules strip-out only once isolation certificates are received.
Pricing & Booking
Cost depends on the size of the project, materials being removed, access, waste disposal, and any grinding required. We provide clear, fixed-scope quotes so there are no surprises.
Yes, all our quotes are free and no-obligation. We can often provide quotes from photos, measurements, and plans.
For residential projects, we recommend 2-3 weeks advance notice. For commercial or lease handover projects, contact us as soon as possible to secure your preferred dates.
Bank transfer is our standard payment method. Card payments and alternative arrangements can be discussed as needed.
Commercial strip outs typically cost AUD 80 to AUD 200 per square metre on the Gold Coast and Brisbane. Final pricing depends on building access, fixture density, asbestos risk and waste volume. We provide free fixed-scope quotes within 24 hours.
Warehouse and industrial strip outs typically cost AUD 60 to AUD 150 per square metre, depending on racking density, floor coatings and access. We provide free fixed-scope quotes for sites across the Gold Coast and Brisbane.
Shop and office defits typically cost AUD 100 to AUD 300 per square metre depending on the lease make-good condition required. We work to fixed-scope quotes that match your lease wording exactly.
Body corporate strip outs typically cost AUD 90 to AUD 220 per square metre depending on access, lift requirements and noise restrictions. We work with strata managers to coordinate quiet-hour scheduling.
Residential strip outs typically cost AUD 1,500 to AUD 8,000 for a single room renovation, or AUD 8,000 to AUD 25,000 for a full home gut-out. Pricing depends on size, fixtures and finish removal scope.
Yes. Every commercial strip out and defit starts with a free, fixed-scope written quote. Send through your plans, lease make-good clause or a site brief and we will return an itemised quote, usually within 24 hours.
Kitchen demolition typically costs AUD 800 to AUD 2,500 on the Gold Coast and Brisbane. Final pricing depends on cabinetry size, splashback and flooring inclusion, plus access difficulty. Free quotes from photos.
Concrete grinding typically costs AUD 25 to AUD 80 per square metre depending on coating type and area. Light grinding for adhesive removal sits at AUD 25 to 45; epoxy or paint stripping is AUD 40 to 80 per square metre.
Bathroom demolition typically costs AUD 1,500 to AUD 4,500 across the Gold Coast and Brisbane. Pricing depends on size, tile type, access and asbestos risk in older homes. Itemised fixed-scope quotes available.
Timber and bamboo floor removal typically costs AUD 25 to AUD 45 per square metre on the Gold Coast and Brisbane. Includes ride-on scraping, adhesive removal and subfloor prep. Free quote from photos.
Carpet removal typically costs AUD 8 to AUD 15 per square metre. Vinyl removal with adhesive cleanup is AUD 15 to AUD 30 per square metre. Multi-layer or bitumen vinyl may cost more due to extra grinding.
Tile removal typically costs AUD 30 to AUD 60 per square metre for residential and AUD 40 to AUD 80 per square metre for heavy commercial tiles. Includes bedding removal and substrate prep.
Paint and epoxy removal typically costs AUD 30 to AUD 80 per square metre depending on coating thickness and surface. Diamond grinding handles all common coatings in a single pass.
Rubbish removal is quoted on the volume and weight of material, the type of waste, and site access for trucks. We give you a clear, fixed price per job before we load the first truck, so there are no surprises.
During & After the Job
Timelines vary: bathrooms take 1-2 days, kitchens around 1 day, apartments 1-2 days, and larger commercial projects can take several days. We'll give you a clear timeline with your quote.
Absolutely. All demolition waste is removed, the area is swept and vacuumed, and it's left in a trade-ready condition for the next stage of your project.
We stop work, show you the issue, and explain your options. The scope is then adjusted accordingly, or we refer an appropriate trade if needed.
Yes, we stand behind the quality and completeness of our work as agreed in the scope. If anything needs correcting, we return to make it right.
After a bathroom strip out you are left with a clean, trade-ready shell: bare wall and floor substrate with all fixtures, tiles, bedding and old waterproofing removed. The space is ready for your waterproofer and tiler to begin straight away.
We help you prepare for it. Strip It Out provides the scope, insurance details and schedule your strata manager or committee needs for approval, and we plan the works around the building's by-laws. The owner or committee lodges the formal application.
Yes. We contain dust with barriers, protect shared areas and lifts, and schedule noisy work for after hours or weekends where needed, so adjacent tenancies keep trading while we strip out your space.
Yes. Open-plan kitchen conversions are common. We can remove a non-structural wall alongside the kitchen strip out, coordinating licensed trades for any wiring or plumbing inside it. Load-bearing walls are referred to a builder and engineer.
Yes. We remove coatings back to bare, sound concrete and grind it to the profile your next finish needs. The slab is left clean, flat and ready for a new coating, polish or floor covering.
That is the goal. We scope the works directly to your lease make-good clause, document the finished condition, and coordinate with the property manager, so the tenancy is handed back in the required state without dispute.
An internal strip out removes only non-structural elements (partitions, ceilings, floors, fixtures), leaving the structural shell intact. A full demolition removes the entire building including load-bearing walls, slab and roof. They require different licences and approvals — strip outs are usually a one-to-six-week job; full demolitions take longer and need a WorkSafe Queensland demolition licence and council approval.
Yes. For operating facilities we stage the strip out and work after hours where needed, so part of the warehouse can keep running while we clear the rest.
On-site durations: a single residential room (kitchen or bathroom) is 1-2 days; a full residential strip out runs 3-7 days; a small commercial defit (under 200 m²) is 3-7 days; a mid-sized defit (200-1,000 m²) takes 1-3 weeks; a large floor plate (over 1,000 m²) is 3-6 weeks. Allow an extra 1-2 weeks for pre-start activities (asbestos survey, service isolation, SWMS).
Browse Our Services
Find the right strip out service for your project.
Ready to get started?
Contact our friendly team for a free, no-obligation quote. We service the Gold Coast, Brisbane, and surrounding areas 7 days a week.