Warehouse & Industrial in Gold Coast
Large-scale warehouse and industrial strip outs including racking, offices, floor coatings, and concrete grinding.
Strip It Out provides warehouse & industrial across Gold Coast and surrounding suburbs including Southport, Surfers Paradise, Broadbeach, Broadbeach Waters. Our team is fully licensed, insured and available 7 days a week, with free fixed-scope quotes typically returned within 24 hours. Gold Coast is Home base from our Gold Coast base, allowing fast response times.
Why Hire Strip It Out for Warehouse & Industrial in Gold Coast
Gold Coast is dense with offices, retail tenancies and hospitality venues, which means lease make-good and end-of-lease defit work is a major part of our weekly schedule here. We coordinate with property managers, fitout contractors and landlords to deliver fixed-scope handovers that meet the exact wording of your lease. For warehouse & industrial specifically, this means our team arrives ready for the access, dust-control and waste-management requirements typical of properties in Gold Coast. We bring HEPA extraction, dust barriers and floor protection to every job, and we work to fixed-scope quotes so there are no surprises on invoice day.
About Our Warehouse & Industrial Service
A warehouse and industrial strip out clears a large facility back to a workable shell: racking and shelving out, internal offices demolished, floor coatings ground off, and mezzanines and redundant services removed. Strip It Out handles warehouse strip outs and industrial defits across the Gold Coast and Brisbane, preparing your facility for a new tenant, a refit, or a clean lease handover.
Part of our broader internal strip out and demolition services — see the hub page for the Queensland regulatory framework, process, cost factors and contractor vetting checklist.
We take on industrial sites of any scale. That includes pallet racking and shelving removal, internal office and partition demolition, suspended ceiling and lighting removal, and stripping floor coatings, line marking and adhesives. Where the slab is being prepared for a new use, we grind the concrete and remove old epoxy and paint coatings back to bare substrate, and every load of debris is removed and disposed of responsibly.
What affects the cost of a warehouse strip out
Industrial strip outs are quoted on scope and access more than floor area alone. The key factors:
- The volume of racking, mezzanine steel and fixtures to dismantle and remove
- Whether floor coatings, line marking or adhesives need grinding back
- Site access for trucks, machinery and waste removal
- Operating constraints, such as staged works to keep part of the facility running
You receive a detailed, fixed-scope quote so the budget is locked in before we start.
How long a warehouse strip out takes
Timeframes vary widely with size. A modest industrial unit can be cleared in a few days; a large distribution centre or multi-bay facility is staged over one to several weeks. We work efficiently and, where needed, in stages or after hours to minimise downtime and keep your facility or neighbouring tenancies operating.
Warehouse and industrial strip outs often run alongside our commercial strip out service for the office component of a site. Whether you are decommissioning a lease, clearing for sale, or refurbishing for a new operation, we manage the whole job with one licensed crew.
As a fully licensed and insured, family-owned team with more than seven years of experience, we work to Queensland WHS and environmental standards on every industrial site. Call Strip It Out for a free, fixed-scope quote on warehouse and industrial strip outs across the Gold Coast and Brisbane.
- Racking & shelving removal
- Internal office partition removal
- Floor covering & coating removal
- Concrete grinding & floor preparation
- Mezzanine strip outs
- Full debris removal & disposal
Servicing Gold Coast and Surrounding Suburbs
Our warehouse & industrial crews service the entire Gold Coast region, covering Southport, Surfers Paradise, Broadbeach, Broadbeach Waters, Main Beach, Benowa and 19 more. Gold Coast has a population of approximately 120,000+, which keeps demand for warehouse & industrial consistent year-round. Being Home base from our Gold Coast base allows us to respond quickly, often scheduling site visits within 1 to 3 business days of your enquiry.
Our Warehouse & Industrial Process in Gold Coast
Every warehouse & industrial project in Gold Coast follows the same proven process. We adapt to local building styles, body corporate rules and council requirements, but the fundamentals stay consistent so you always know what to expect.
- 1
Site Assessment
We inspect the space, confirm scope, identify any hazardous materials, and provide a fixed-scope written quote within 24 hours.
- 2
Protection & Containment
We protect adjacent tenancies, common areas, lifts and floors with plastic sheeting, dust barriers and tape before any work begins.
- 3
Demolition
We remove walls, ceilings, fixtures, flooring and fittings using low-dust extraction equipment and HEPA vacuums to keep the site clean.
- 4
Waste Removal
All demolition waste is loaded into skip bins and disposed of responsibly in accordance with Queensland environmental regulations.
- 5
Final Clean-up & Handover
We sweep, vacuum and inspect the space, then hand over a trade-ready shell prepared for your next contractor or fitout team.
More About Gold Coast
Strip Out Services on the Gold Coast
The Gold Coast is home base for Strip It Out. Since 2018 we have been clearing the way for renovations and fit-outs right across the city — Southport, Surfers Paradise, Broadbeach, Main Beach, Labrador, the canal suburbs of Benowa, Bundall, Mermaid Waters and Broadbeach Waters, and the northern beaches through Runaway Bay and Paradise Point.
The city we know best
Operating from the Gold Coast since day one means we know its building stock street by street. The beachfront and near-beach suburbs are dense with high-rise and walk-up apartments where renovation is constant and body-corporate-aware planning is essential. The canal-estate suburbs — Mermaid Waters, Broadbeach Waters, Benowa, Isle of Capri — hold established waterfront homes now well into renovation age. And Southport, the Gold Coast's CBD and health precinct, anchors a steady stream of commercial work.
Residential and commercial, all of it
For homeowners we handle bathroom and kitchen demolition, tile removal, flooring removal, concrete grinding and full residential strip-outs. For business, the Gold Coast's relentless hospitality and retail churn — Surfers Paradise, Broadbeach and Southport especially — keeps us in commercial strip-out and defit work, clearing cafes, restaurants, shops and offices for the next fit-out.
The home-base advantage
Because the Gold Coast is our base, there is no travel surcharge and no waiting — local jobs get the fastest quotes and the prompt scheduling that comes with a crew already in the area every day. As a licensed, insured, family-owned team, we treat every Gold Coast property with care and leave it genuinely trade-ready.
We provide free, fixed-scope written quotes for all strip-out and internal demolition work across the Gold Coast.
Warehouse & Industrial FAQs
Helpful Reading
Tips and guides relevant to warehouse & industrial in Gold Coast.
What Is Soft Strip Demolition? The Guide to Commercial Defits
Soft strip demolition removes all non-structural elements from a commercial building, leaving the shell. Also called a defit or make-good.
How to Remove Paint from Concrete: Grinding vs Chemicals
Diamond grinding removes paint from concrete in a single pass; chemical strippers take multiple coats and produce hazardous waste. Which method to use.
How Much Does Bathroom Demolition Cost? Pricing for Precision
Bathroom demolition on the Gold Coast and Brisbane costs AUD 1,500 to AUD 4,500 depending on size, tile type and access. Free fixed-scope quotes today.
Ready to get started?
Contact our friendly team for a free, no-obligation quote. We service the Gold Coast, Brisbane, and surrounding areas 7 days a week.