Skip to content
Strip It Out Demolition
residential
Brisbane Bayside
70-80km

Bathroom Demolition in Brisbane Bayside

Complete bathroom strip outs: fixtures, tiles, waterproofing bedding, and adhesive removal for a trade-ready shell.

Strip It Out provides bathroom demolition across Brisbane Bayside and surrounding suburbs including Wynnum, Wynnum West, Manly, Manly West. Our team is fully licensed, insured and available 7 days a week, with free fixed-scope quotes typically returned within 24 hours. Brisbane Bayside is 70-80km from our Gold Coast base, allowing fast response times.

Why Hire Strip It Out for Bathroom Demolition in Brisbane Bayside

Brisbane Bayside supports a wide range of residential renovation work, from beachside apartments to family homes inland. We adapt our process to suit body corporate buildings, free-standing houses and townhouses without changing our pricing structure. For bathroom demolition specifically, this means our team arrives ready for the access, dust-control and waste-management requirements typical of properties in Brisbane Bayside. We bring HEPA extraction, dust barriers and floor protection to every job, and we work to fixed-scope quotes so there are no surprises on invoice day.

About Our Bathroom Demolition Service

A bathroom strip out is the first stage of any bathroom renovation: removing every fixture, tile, layer of tile bedding and waterproofing membrane to leave a clean, trade-ready shell. Strip It Out provides bathroom demolition and bathroom strip outs across the Gold Coast and Brisbane, typically completed in one to two days with low-dust HEPA extraction.

Part of our broader internal strip out and demolition services — see the hub page for the Queensland regulatory framework, process, cost factors and contractor vetting checklist.

We disconnect and remove the vanity, toilet, shower screen, bath and tapware, then strip wall and floor tiles back to the substrate. Old tile bedding, screed and waterproofing membranes come out too, so your waterproofer and tiler start on a true, level surface. Where the floor needs it, we grind the concrete substrate flat, and we clear all debris and rubbish as we go.

What affects the cost of a bathroom demolition

Bathroom strip out pricing depends on the room and the access, not a flat rate. The main factors:

  • The size of the bathroom and how much wall and floor tiling there is
  • Whether the floor substrate needs grinding after tile removal
  • Access: ground floor, an upper storey, or an apartment with lift restrictions
  • Whether wall and ceiling linings are being removed as well

You get a fixed-scope quote up front, so the cost is clear before we start.

How long a bathroom strip out takes

Most bathroom strip outs are completed in one to two days. A simple fixture-and-tile removal is often a single day; a full gut-out including linings and substrate grinding takes two. We work to your waterproofer's and tiler's start dates so the renovation keeps moving.

We handle single ensuite and main bathroom gut-outs, combined kitchen and bathroom demolition for whole-home renovations, multi-bathroom work for builders and investors, and apartment bathrooms as part of body corporate projects. Bathroom strip outs also fold into a full residential strip out.

Demolishing a tiled bathroom creates a huge amount of fine dust, and bathroom tiles often sit on a sand-and-cement bed containing crystalline silica. Our HEPA extraction, sealed work areas and floor protection keep your home clean and safe. Strip It Out is family-owned, fully licensed and insured, with more than seven years of bathroom demolitions across the Gold Coast and Brisbane. Call for a free quote.

What Affects the Cost of a Bathroom Demolition?

Most bathroom strip outs across Brisbane and the Gold Coast fall within a predictable range, and the quote comes down to:

  • Bathroom size and layout - a compact ensuite is faster than a large family bathroom with a separate bath and shower.
  • Wall tile height - floor-to-ceiling tiling takes longer to strip than half-height walls.
  • Bedding and screed thickness - older bathrooms often have thick sand-cement beds under the tiles that add removal time and waste weight.
  • Fixture removal - bath, vanity, shower screen, toilet and accessories are itemised in the scope.
  • Access - unit bathrooms above ground floor need lift protection and add carry time.
  • Waterproof membrane removal and grinding - if required for the new waterproofing, this adds machine work.

We've published a full pricing guide: how much does bathroom demolition cost? For your exact bathroom, get a free fixed-scope quote - most are returned within 24 hours.

  • Full fixture removal: vanity, toilet, shower, bath
  • Wall & floor tile removal
  • Tile bedding & adhesive removal
  • Wall & ceiling lining removal
  • Concrete grinding of floor substrate
  • Trade-ready finish for waterproofing

Servicing Brisbane Bayside and Surrounding Suburbs

Our bathroom demolition crews service the entire Brisbane Bayside region, covering Wynnum, Wynnum West, Manly, Manly West, Lota, Hemmant and 9 more. Brisbane Bayside has a population of approximately 70,000+, which keeps demand for bathroom demolition consistent year-round. Being 70-80km from our Gold Coast base allows us to respond quickly, often scheduling site visits within 1 to 3 business days of your enquiry.

Our Bathroom Demolition Process in Brisbane Bayside

Every bathroom demolition project in Brisbane Bayside follows the same proven process. We adapt to local building styles, body corporate rules and council requirements, but the fundamentals stay consistent so you always know what to expect.

  1. 1

    Free Quote

    We visit your home or review photos and plans, then provide a fixed-scope quote with timeline. No-obligation, free of charge.

  2. 2

    Trade Coordination

    We coordinate licensed plumbers and electricians for safe disconnection of services before demolition begins.

  3. 3

    Strip Out

    We carefully remove kitchens, bathrooms, flooring, walls and fixtures with dust extraction and floor protection in place.

  4. 4

    Subfloor Preparation

    We grind concrete substrates, remove adhesives, and prepare the subfloor for your new flooring or waterproofing membrane.

  5. 5

    Trade-Ready Finish

    We complete a thorough clean-up so your tilers, waterproofers and renovators can begin work the very next day.

More About Brisbane Bayside

Strip Out Services in Brisbane Bayside

Brisbane Bayside is the residential and light-industrial strip running along Moreton Bay from Wynnum and Manly northward through Hemmant, Murarrie and Lytton. It is a distinct market from inner Brisbane, with older housing stock, established renovation activity and a strong commercial corridor anchored by the Port of Brisbane. Our team services the entire Bayside region as a regular part of our weekly Brisbane schedule.

Older Housing Stock and Renovation Demand

Wynnum, Manly and the surrounding Bayside suburbs were largely developed between the 1920s and 1970s. Post-war workers' cottages, weatherboard character homes and brick veneer family houses dominate the streetscape, and many are now being renovated, extended or fully gutted by new owners. Bathroom and kitchen strip outs are our most common Bayside job, often combined with timber floor removal and concrete grinding to prepare slabs for new flooring.

Bayside Lifestyle Suburbs

Manly, with its yacht squadron and marina, is one of Brisbane's most desirable bayside suburbs. Wynnum esplanade, Lota foreshore and the Wynnum North Road retail strip all see steady residential and small commercial turnover. Strip It Out delivers full residential strip outs, partial demolition and surface preparation across these suburbs, including body corporate apartment work where access and noise restrictions apply.

Commercial and Port-Adjacent Industrial

Hemmant, Lytton and Murarrie form one of Brisbane's most concentrated industrial corridors. Logistics warehouses, refining and chemical facilities, container yards and light manufacturing tenancies turn over regularly, particularly as long-term leases end and new tenants take over. We handle warehouse strip outs, racking removal, internal office demolition and floor coating stripping across the port-adjacent zone, with experience working around active 24-hour operations.

Older Character Homes in Belmont and Balmoral

Belmont, Chandler, Gumdale and Balmoral on the western edge of Bayside contain large numbers of pre-war character homes. These often require careful strip out work because internal walls, ceilings or floors may contain bonded asbestos that needs to be tested and removed under controlled conditions. Strip It Out is fully licensed for friable and non-friable asbestos removal, with all waste disposed at SafeWork QLD-approved facilities.

Travel and Coordination

Bayside is approximately 70 to 80 kilometres from our Gold Coast base via the M1 and Gateway Motorway. We mobilise crews and equipment efficiently for Brisbane work and typically schedule full days on site to maximise productivity. For larger projects we can arrange overnight crew accommodation to keep timelines tight.

Why Choose Strip It Out for Bayside

We service Brisbane every week, know the access constraints around the port and bay, and work with property managers, body corporates and commercial landlords across the corridor. Free fixed-scope quotes, fully licensed and insured, available 7 days.

Call 0430 030 633 for a free quote on your Brisbane Bayside strip out project.

Bathroom Demolition FAQs

Ready to get started?

Contact our friendly team for a free, no-obligation quote. We service the Gold Coast, Brisbane, and surrounding areas 7 days a week.