Paint & Epoxy Removal in Brisbane Bayside

Paint and epoxy removal strips old coatings, including epoxy, polyurethane, floor paint and sealers, from concrete and masonry back to a bare, sound surface ready for a new finish. Strip It Out provides paint and epoxy removal across the Gold Coast and Brisbane for garages, warehouses, retail floors and industrial slabs.

Part of our broader internal strip out and demolition services — see the hub page for the Queensland regulatory framework, process, cost factors and contractor vetting checklist.

Coatings on concrete are designed to bond hard, so removing them properly takes the right equipment. We use diamond grinding and surface preparation methods to strip epoxy, polyurethane, paint and sealers without damaging the slab, then leave the concrete ground flat and profiled for the next coating or floor. The process is dust-controlled with HEPA extraction, and all debris is removed.

What affects the cost of paint and epoxy removal

Coating removal is quoted on area and how tough the coating is:

• The floor area being stripped
• The coating type and thickness: a single floor paint versus a built-up epoxy system
• How well the coating is bonded and the slab's condition
• The surface profile the next coating requires

We assess the floor and provide a clear, fixed quote before starting.

How long paint and epoxy removal takes

A residential garage floor is usually stripped and prepped within a day. Large industrial and warehouse floors are quoted on area and staged to suit the site. Dust-controlled grinding means surrounding areas stay clean throughout.

We remove coatings from garage floors, warehouse and factory slabs, retail and commercial floors, and driveways. Paint and epoxy removal pairs closely with our concrete grinding service and is often part of a warehouse and industrial strip out.

Strip It Out is a family-owned, fully licensed and insured team with more than seven years of coating removal and floor preparation across the Gold Coast and Brisbane. We hand over a bare, profiled slab ready for its new finish. Call for a free paint and epoxy removal quote.

Strip Out Services in Brisbane Bayside

Brisbane Bayside is the residential and light-industrial strip running along Moreton Bay from Wynnum and Manly northward through Hemmant, Murarrie and Lytton. It is a distinct market from inner Brisbane, with older housing stock, established renovation activity and a strong commercial corridor anchored by the Port of Brisbane. Our team services the entire Bayside region as a regular part of our weekly Brisbane schedule.

Older Housing Stock and Renovation Demand

Wynnum, Manly and the surrounding Bayside suburbs were largely developed between the 1920s and 1970s. Post-war workers' cottages, weatherboard character homes and brick veneer family houses dominate the streetscape, and many are now being renovated, extended or fully gutted by new owners. Bathroom and kitchen strip outs are our most common Bayside job, often combined with timber floor removal and concrete grinding to prepare slabs for new flooring.

Bayside Lifestyle Suburbs

Manly, with its yacht squadron and marina, is one of Brisbane's most desirable bayside suburbs. Wynnum esplanade, Lota foreshore and the Wynnum North Road retail strip all see steady residential and small commercial turnover. Strip It Out delivers full residential strip outs, partial demolition and surface preparation across these suburbs, including body corporate apartment work where access and noise restrictions apply.

Commercial and Port-Adjacent Industrial

Hemmant, Lytton and Murarrie form one of Brisbane's most concentrated industrial corridors. Logistics warehouses, refining and chemical facilities, container yards and light manufacturing tenancies turn over regularly, particularly as long-term leases end and new tenants take over. We handle warehouse strip outs, racking removal, internal office demolition and floor coating stripping across the port-adjacent zone, with experience working around active 24-hour operations.

Older Character Homes in Belmont and Balmoral

Belmont, Chandler, Gumdale and Balmoral on the western edge of Bayside contain large numbers of pre-war character homes. These often require careful strip out work because internal walls, ceilings or floors may contain bonded asbestos that needs to be tested and removed under controlled conditions. Strip It Out is fully licensed for friable and non-friable asbestos removal, with all waste disposed at SafeWork QLD-approved facilities.

Travel and Coordination

Bayside is approximately 70 to 80 kilometres from our Gold Coast base via the M1 and Gateway Motorway. We mobilise crews and equipment efficiently for Brisbane work and typically schedule full days on site to maximise productivity. For larger projects we can arrange overnight crew accommodation to keep timelines tight.

Why Choose Strip It Out for Bayside

We service Brisbane every week, know the access constraints around the port and bay, and work with property managers, body corporates and commercial landlords across the corridor. Free fixed-scope quotes, fully licensed and insured, available 7 days.

Call 0430 030 633 for a free quote on your Brisbane Bayside strip out project.