Paint & Epoxy Removal in Logan
Professional removal of paint, epoxy coatings, and surface treatments from concrete and masonry surfaces.
Strip It Out provides paint & epoxy removal across Logan and surrounding suburbs including Underwood, Springwood, Daisy Hill, Slacks Creek. Our team is fully licensed, insured and available 7 days a week, with free fixed-scope quotes typically returned within 24 hours. Logan is 30-45km from our Gold Coast base, allowing fast response times.
Why Hire Strip It Out for Paint & Epoxy Removal in Logan
Logan has steady demand for specialist removal and grinding work across both home renovation and commercial refurbishment projects. Our diamond grinders, ride-on scrapers and HEPA extraction units are deployed to this area regularly. For paint & epoxy removal specifically, this means our team arrives ready for the access, dust-control and waste-management requirements typical of properties in Logan. We bring HEPA extraction, dust barriers and floor protection to every job, and we work to fixed-scope quotes so there are no surprises on invoice day.
About Our Paint & Epoxy Removal Service
Paint and epoxy removal strips old coatings, including epoxy, polyurethane, floor paint and sealers, from concrete and masonry back to a bare, sound surface ready for a new finish. Strip It Out provides paint and epoxy removal across the Gold Coast and Brisbane for garages, warehouses, retail floors and industrial slabs.
Part of our broader internal strip out and demolition services — see the hub page for the Queensland regulatory framework, process, cost factors and contractor vetting checklist.
Coatings on concrete are designed to bond hard, so removing them properly takes the right equipment. We use diamond grinding and surface preparation methods to strip epoxy, polyurethane, paint and sealers without damaging the slab, then leave the concrete ground flat and profiled for the next coating or floor. The process is dust-controlled with HEPA extraction, and all debris is removed.
What affects the cost of paint and epoxy removal
Coating removal is quoted on area and how tough the coating is:
- The floor area being stripped
- The coating type and thickness: a single floor paint versus a built-up epoxy system
- How well the coating is bonded and the slab's condition
- The surface profile the next coating requires
We assess the floor and provide a clear, fixed quote before starting.
How long paint and epoxy removal takes
A residential garage floor is usually stripped and prepped within a day. Large industrial and warehouse floors are quoted on area and staged to suit the site. Dust-controlled grinding means surrounding areas stay clean throughout.
We remove coatings from garage floors, warehouse and factory slabs, retail and commercial floors, and driveways. Paint and epoxy removal pairs closely with our concrete grinding service and is often part of a warehouse and industrial strip out.
Strip It Out is a family-owned, fully licensed and insured team with more than seven years of coating removal and floor preparation across the Gold Coast and Brisbane. We hand over a bare, profiled slab ready for its new finish. Call for a free paint and epoxy removal quote.
- Epoxy coating removal
- Floor paint stripping
- Polyurethane removal
- Concrete surface restoration
- Diamond grinding methods
- Dust-controlled process
Servicing Logan and Surrounding Suburbs
Our paint & epoxy removal crews service the entire Logan region, covering Underwood, Springwood, Daisy Hill, Slacks Creek, Shailer Park, Loganholme and 18 more. Logan has a population of approximately 403,000+, which keeps demand for paint & epoxy removal consistent year-round. Being 30-45km from our Gold Coast base allows us to respond quickly, often scheduling site visits within 1 to 3 business days of your enquiry.
Our Paint & Epoxy Removal Process in Logan
Every paint & epoxy removal project in Logan follows the same proven process. We adapt to local building styles, body corporate rules and council requirements, but the fundamentals stay consistent so you always know what to expect.
- 1
Surface Inspection
We assess the substrate, identify the coating type, and select the appropriate diamond grinding heads or extraction equipment.
- 2
Equipment Setup
We set up dust extraction with HEPA filtration and seal off the work area to contain dust and debris during grinding.
- 3
Grinding & Removal
We use professional diamond grinders to remove paint, epoxy, adhesive, tile bedding or high spots from concrete surfaces.
- 4
Vacuum & Cleanup
We vacuum all dust and debris with industrial HEPA vacuums and dispose of all waste responsibly.
- 5
Final Inspection
We inspect the surface for level, smoothness and adhesive residue, leaving you a substrate ready for new flooring.
More About Logan
Strip Out Services in Logan
Logan is one of South East Queensland's largest and fastest-growing cities, and that scale shows up directly in demolition demand. Strip It Out works across the whole of Logan City — from the commercial centres of Springwood, Underwood and Browns Plains, through the established residential belt of Woodridge, Kingston, Logan Central and Marsden, out to the rapidly expanding new-estate communities around Yarrabilba, Bethania and Holmview.
A city of two demolition markets
Logan effectively has two distinct strip-out markets, and we service both.
The first is established housing stock. Suburbs like Woodridge, Kingston, Logan Central and Slacks Creek are full of post-war and mid-century homes, many now being renovated by owner-occupiers and investors. Homes of this age frequently have tiled wet areas laid on thick mortar beds and contain fibre-cement sheeting, so careful, dust-controlled bathroom and kitchen demolition and tile removal are exactly the jobs we are called for.
The second is commercial and industrial. Springwood, Underwood and Browns Plains carry large retail, office and showroom precincts where tenancies change hands regularly, generating steady commercial strip-out and defit work. The industrial pockets around Slacks Creek and Crestmead add warehouse and factory strip-outs to the mix.
Local knowledge across a wide city
Logan's footprint is wide and its housing ages and styles vary street to street. A strip-out crew that knows the area can quote accurately and plan access — whether that is a tight Woodridge cottage block or a Browns Plains shopping-centre tenancy with after-hours requirements. As an owner-operated team, we are on Logan jobs regularly and treat every property, owner-occupied or investment, with the same care.
We provide free, fixed-scope written quotes for strip-outs, internal demolition, tile and floor removal, concrete grinding and rubbish removal right across Logan, and leave every space clean and trade-ready.
Paint & Epoxy Removal FAQs
Helpful Reading
Tips and guides relevant to paint & epoxy removal in Logan.
Internal Strip Out vs Demolition vs Defit: An Australian Plain-English Guide
Strip out, internal demolition, soft strip, defit, make-good — Australian construction uses these terms interchangeably, but they mean different things. Here's how to tell which one your job actually is, and why it matters for licensing and price.
How Much Does a Strip-Out Cost? A Gold Coast & Brisbane Guide
A strip-out is quoted job by job; there is no flat rate. Here is exactly what goes into a strip-out quote, the seven factors that change the price, and how to budget for your Gold Coast or Brisbane renovation.
Silica Dust and Home Renovations: A Gold Coast & Brisbane Guide
Cutting, grinding or demolishing tiles, concrete and masonry releases respirable crystalline silica, a dust linked to silicosis and lung cancer. Here is what Gold Coast and Brisbane homeowners need to know before a renovation.
Ready to get started?
Contact our friendly team for a free, no-obligation quote. We service the Gold Coast, Brisbane, and surrounding areas 7 days a week.